Installation of sanitary fittings for cold and hot water

The following recommendations will help to properly perform the connection Wirsbo-PEX tubing for plumbing fixture, with the use of PEX boxes and knees for reinforcement:


• Identify the place of installation of sanitary fittings and route of.
Installation of plumbing system Wirsbo

• Run in the wall Stroebe for laying tubing and holes for installing boxes with the tribes to connect mixers. Stroebe need to perform so as to provide the required bend radius tubing. tubing can also be mounted in the walls of frame buildings, where there is no need to implement Stroebe. Install the template in the supposed site of installation to connect to the device. Run a temporary connection boxes and the tribes to the hinges with a stub. Hold the box in a prescribed place and fix the template. Flatten the surface around each box with a knee and wait until the solution solidifies. Pull the plug and remove the template.
Installation of water Wirsbo

• Loosen the screws and pull out of the box knee. Drag a box of PEX tubing with a protective tube "Poeschl. Stick out from the protective tubing PEX tubing with 100-150 mm. PEX tubing at this stage should go out of the box. With Quick-Easy connection to connect the knee to the device with the tubing. With the mounting sleeve to insert the tube with the knee in a box. Tighten the knee to the box. Unscrew and remove the mounting nut.

Installation of water Wirsbo PEX

• In Stroebe pave the tubing. Measure the required length of tubing to connect PEX to a manifold and trim it with scissors. Connect the tubing to the collector, in accordance with installation instructions for the implementation of the connection Quick-Easy.
Installation of water Wirsbo

• Connect the other tubing to the collector
Installation of water Wirsbo PEX Tubing

• After the hydraulic test all Stroebe plaster and smooth over the surface of the wall.